Designed, developed and made in France, this digital cinema audio processor offers a unique opportunity to dramatically improve sound in commercial cinemas.
Trinnov Audio, a proven innovator of advanced 3D sound technologies, present in film mixing stages and dubbing theatres, broadcast control rooms and mastering studios, introduces our most advanced digital cinema audio processor: the Trinnov Ovation.
The Trinnov Ovation cinema processor delivers up to 24 output channels, seamlessly working with every DCI format. It provides a whole loudspeaker management system capable of intelligent digital crossover alignment as well as Trinnov Optimizer proprietary automatic room equalisation algorithms.
By fitting the Optimizer technology into the Ovation processor, Trinnov compensates for the acoustic problems of the room architecture and immerses the audience into the heart of the audio experience intended by the director.
The Trinnov Optimizer technology provides unique measurement, calibration and operation tools not found in any other DCI cinema processor. Once you’ve experienced it, Ovation will become the essential calibration tool and screening system for your movie theatres.
The Trinnov Optimizer technology seeks to serve the film and instantly computes the most appropriate filtering to achieve a predefined (X-Curve) or custom target curve allowing manual complementary fine-tuning.
Digital Inputs
Sampling rates: 44.1, 48, 96kHz
8 channels AES DCI, expandable to 16 channels AES DCI via DB-25 connector (Dig IN 1)
8 channels AES DCI, expandable to 16 channels AES DCI via RJ45 connector (Dig IN 2)
2 x SPDIF via BNC connector (Dig IN 3, Dig IN 4)
2 x SPDIF via RCA connector (Dig IN 5, Dig IN 6)
1 x SPDIF TOSLINK (Dig IN 7)
Analogue Inputs
8 balanced inputs (ANALOG IN 1) via DB-25 (impedance >10 kO, +24 dBu max)
8 balanced inputs (Calibration MICs) via 2 x RJ45 (1 to 4, and 5 to 8)
2 balanced inputs (LINE L-R) via XLR connectors for mixer set (impedance >10 kO, +18 dBu max)
2 unbalanced inputs (Ana IN2) via RCA connector (impedance >10 kO, +12 dBu max)
2 Balanced microphones input XLR connectors (MIC 1-2) with phantom power
Analogue Ouputs
1 to 8 channels amplifiers/loudspeakers outputs (Analog OUT1, 1-8) via DB-25 connector (impedance<100 O, +24 dBu max)
Optional for bi-amp and tri-amp:
1 to 8 channels amplifiers/loudspeakers outputs (Analog OUT2, 9-16) via DB-25 connector (impedance <100Ω, +24 dBu max)
1 to 8 channels amplifiers/loudspeakers outputs (Analog OUT3, 17-24) via DB-25 connector (impedance <100Ω, +24 dBu max)
Hearing-impaired: 1 unbalanced output via RCA connector (H/I)
Visual Narration: 1 unbalanced output via RCA connector (VI)
Auxiliary: 2 unbalanced output via RCA connector (Aux1, Aux2)
High Performance
A/D signal-to-noise ratio: 119 dBA, THD+N: -103 dB
D/A signal-to-noise ratio: 118 dBA, THD+N: -98 dB
Independent power supplies for audio and processing sections
Advanced jitter-rejection technologies
64-bit floating point processing
Integration
Remote control and automation: GPIO and Ethernet
Setup and configuration
VNC Client or via VGA monitor and mouse
Power Supply
240V AC / 50Hz
Consumption
90W maximum
Dimensions
89mm high x 483mm wide x 440mm deep
Weight
9kg