SYSTEM RECOMMENDATIONS

Recommended room depth
5m – 14m

Minimum screen size 16:9
145″ (3210mm x 1806mm)

Minimum screen size 21:9
140″ (3268mm x 1401mm)

‍

LCR SPEAKER MODULES

Frequency range
38Hz-16kHz in room response

Power handling
Low frequency element 100 – 700 Watts RMS recommended amplifier power
High frequency element 100 – 400 Watts RMS recommended amplifier power

Sensitivity
Low frequency element 98dB for 2.83 volts at 1 metre
High frequency element 101dB for 2.83 volts at 1 metre

Impedance
Low frequency element 8 Ohms
High frequency element 8 Ohms

Configuration
3-way Bi-amp

Crossover frequency
400Hz Active crossover required – see manual for recommended crossover settings

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion

Mid frequency driver
Krix proprietary 90º x 40º short throw dual horn with 152 mm (6″) paper cone driver, ferrite magnet, 38 mm (1 ½”) voice coil and copper shorting ring

High frequency driver
Krix proprietary 90º x 40º short throw dual horn with 25mm (1′)’ throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround

Input terminals
Gold plated spring terminals

Dimensions
1220mm high x 550mm wide x 335mm deep (3165mm wide including subwoofer modules)

Weight
65kg each

‍

SUBWOOFER MODULES

Frequency range
25Hz-200Hz in room response

Power handling
200 – 1400 Watts RMS recommended amplifier power

Recommended processing
High pass filter: 20Hz 24dB / Octave Butterworth
Limiter: 1000W (8 Ohms)

Sensitivity
100dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input terminals
High level gold plated spring terminals

Dimensions
1220mm high x 750mm wide x 335mm deep (3165mm wide including LCR modules)

Weight
65kg each

The MX-40 screen speaker system is the first in the Series MX range to incorporate a 3-way design – delivering an incredibly smooth, consistent and compelling experience that encompasses the true dynamic power and clarity of real cinema sound.

Much like the MX-30, the MX-40 is best suited to larger home cinemas that are five to fourteen metres in depth. The new 3-way design features a dedicated high frequency compression driver and newly engineered 152mm midrange driver, both coupled to a brand new single-mould, dual-horn system that has been developed by Krix over three years. Principle benefits of the horn are a uniform, constant directivity pattern, improved frequency response and extremely low distortion, even when pushed to extreme sound pressure levels.

The 380mm bass drivers are made from a high stiffness paper cone, with a 75mm voice coil for increased linear excursion and a powerful vented magnet assembly lowers distortion.

Each of the two subwoofers contain a 455mm driver with 100mm voice coil, dual spider and vented magnet assembly for clean, tight and powerful bass that you’ll hear… and feel.

The MX-40 is the first Series MX system that is bi-ampable and incorporates two pairs of binding posts per speaker module. The patterned acoustic material on the front baffle gives the unit a refined style and increases the overall surface area of absorption.

For the ultimate cinema experience at home, play it through Krix.